Intel SOCKET 370 CELERON TS-ASP3 Manuale Utente

TS-ASP3 USER’S MANUALIntel ® Socket 370 CeleronTM/Pentium® III FC-PGA Series

6 HARDWARE INSTALLATION2.2 Layout of Transcend TS-ASP3 MotherboardTranscendPCI Slot1 (PCI1)PCI Slot2 (PCI2)PCI Slot3 (PCI3)PCI Slot6 (PCI

The JP4 Jumper allows you to set the FSB (Front Side Bus) to 66/100/133MHz configuration.When the Jumper is set to “Auto”, the freqency range depends

8 HARDWARE INSTALLATION2.3.2 Using Jumper JP1 to clear CMOSTo clear the CMOS data, you should turn off your computer’s power and short p

To use an external CNR card, the onboard audio CODEC can be enabled or disabled via thisjumper. Please disable the onboard audio CODEC if you want to

10 HARDWARE INSTALLATION2.3.4 Keyboard Wake-Up (3-pin KB-AWK)This function makes the Keyboard Power Up the system. Set this jumper to “

VCC3 AdjustJP28VCC3Low LoadMedium LoadHigh LoadTranscend2.3.5 VCC3 Adjust HARDWARE INSTALLATION 11Keep this selection fixed u

12 HARDWARE INSTALLATION2.4 Connector Description2.4.1 Primary/Secondary IDE Connectors (Two 40-pin IDE)This motherboard supports two 40

HARDWARE INSTALLATION 132.4.2 Floppy Disk Drive Connector (34-pin FDC)This connector supports the floppy disk drive ribbon cable

14 HARDWARE INSTALLATION2.4.3 Fan Power ConnectorsThere are three fan power connectors on the motherboard: CPU-FAN, POWER-FAN, and CASE-FA

HARDWARE INSTALLATION 152.4.4 Memory ConfigurationThis motherboard must be installed with PC100/PC133 SDRAM DIMM. You can

TS-ASP3 MotherboardSupporting Intel ® Pentium® III/Celeron™ Series Processor (Coppermine Core)66/100/133MHz Front Side BusIntel® 815EP ChipsetWelcome!

16 HARDWARE INSTALLATIONPanel Connector+++S_LEDHDD_LEDNCRESETSOFT_OFFSPEAKER++KEY LOCK119202POWER LEDTranscend2.4.5 Panel ConnectorsPow

HARDWARE INSTALLATION 17Suspend Mode LED Lead (2-pin S_LED)The S_LED will light when the system is in suspend mode.Pin2 : +5

18 HARDWARE INSTALLATION2.4.6 Wake-on-LAN Connector (3-pin WOL)This connector connects to LAN cards with a Wake-on-LAN output. The syst

HARDWARE INSTALLATION 192.4.7 Power Connector (20-pin PWR-CONN)Make sure you plug the ATX power supply connector in properly.

2.4.8 IrDA-Compliant Infrared Module Connector (10-pin IrDA)The IrDA connector can be configured to support a wireless infrared module. With this mo

HARDWARE INSTALLATION 212.4.9 Internal Serial Port Connector COMBYou can use the provided serial port bracket to add a seri

2.4.10 Internal Audio ConnectorThese connectors allow you to receive stereo audio input from sound sources such as a CD-ROM, TV tuner, or MPEG card.

HARDWARE INSTALLATION 232.4.11 USB 3/4 ConnectorUSB 3/4 ConnectorTranscendGNDUSBP2+GNDUSBP2-USBPowerUSBPowerUSBP3-USBP3+NC

1. PS/2 Mouse2. PS/2 Keyboard4. Parallel Port(Printer)3. USB25. COMA7. Game/MIDI Port8. Line_out9. Line_in3. USB110. MIC inBack Panel I/O Ports24

CHAPTER 3 BIOS SETUP3.1 BIOS SetupAward BIOS has a built-in Setup program that allows users to modify the basic systemconfiguration. This informati

Table of ContentsCHAPTER 1 INTRODUCTION 11.1 Essential Handling Precautions ...

[+] Increase the numeric value or make changes[-] Decrease the numeric value or make changes[F1] General help on Setup navigation keys[F5] Load previo

BIOS SETUP 27• Set Supervisor/User PasswordTo change, set, or disable a password• Save &

28 BIOS SETUP• IDE HDD Auto-Detection: Detect the HDD on this channel. If the detection is successful,it fills the remainin

BIOS SETUP 29• Precomp: Write precompensation cylinder• Landing Zone: Landing zone•

- All, But Diskette: If the BIOS detects any non-fatal error except floppy disk drive, POSTstops and prompts you to take corrective action.- All, But

BIOS SETUP 31• CPU Internal Cache/External CacheCache memory is additional memory that is muc

32 BIOS SETUP• Boot Up NumLock StatusToggle between “On” and “Off” to control the state of the NumLock key when the systemboo

BIOS SETUP 333.5 Advanced Chipset FeaturesThis option will change the values of the chipse

• Video BIOS CacheableSelecting “Enabled” allows caching of the video BIOS. This action can increase systemperformance.• Memory Hole at 15M-1

BIOS SETUP 353.6 Integrated PeripheralsChoose this option and the following display appears.•

2.4.11 USB 3/4 Connector ... 232.5 External Back Panel I/O Ports ...

• • • • • IDE Primary/Secondary Master/Slave UDMAUltra DMA/33/66/100 implementation is possible only if your IDE hard drive can support it,and if the

BIOS SETUP 37- Any Key: Press any key to Power On the system.- Button only: Power O

• • • • • Parallel Port ModeThis field allows you to set the operation mode of the parallel port.- SPP: Allows normal-speed operation, but in one dir

BIOS SETUP 393.7 Power Management SetupThe Power Management Setup allows you to configure yo

1. Suspend Mode 2. HDD Power DownThere are three selections for Power Management. Two of them have fixed mode settings. 1. Min. Power Saving: Mi

BIOS SETUP 41• Suspend ModeAfter the selected period of system inactivity (1 minute to 1 hour

3.8 PnP/PCI Configuration SetupPrimary IDE 0Primary IDE 1Secondary IDE 0Secondary IDE 1FDD, COM, LPT PortPCI PIRQ[A-D]#The settings in these fields e

• PCI n AssignmentEach PCI Slot can assign its own IRQ number. When you assign one and find out that thereal IRQ is different from your assignment, t

3.9 PC Health StatusThis menu provides two thermo-protect functions (CPU warning temperature and shutdowntemperature) and a hardware monitor center.

BIOS SETUP 453.10 Frequency/Voltage Control• CPU Vcore SelectThis option adjusts the C

INTRODUCTION 1CHAPTER 1 INTRODUCTION1.1 Essential Handling PrecautionsIMPORTANT. Read this page before u

• CPU Clock RatioThis function allows you to set the CPU internal frequency ratio. It determines the CPUinternal frequency according to the following

3.11 Load Fail-Safe DefaultsThis option allows you to load the troubleshooting default values permanently stored in the BIOSROM. NOTE: These default

48 BIOS SETUP3.13 Supervisor PasswordThis option allows you to set a password to prevent others from changing the BIOS setting

3.14 User PasswordThis option allows you to set a password to prevent others from changing the BIOS settings ofyour system. This operation is the sa

50 BIOS SETUP3.16 Exit Without SavingAbort current changes and exit the BIOS utility.

CHAPTER 4 SOFTWARE SETUPInsert the CD-ROM enclosed with your motherboard into the CD-ROM drive. After the Autorunprogram has executed, please check

4.2 Intel Security Controller DriverThis section helps you to install a security controller for Windows 95/98. Click Security DriverSetup, and then

SOFTWARE SETUP 53Click here3Click here4Click here54.3 Audio Driver SetupThis section helps you to setup the

54 SOFTWARE SETUPClick here1Click here2Click here3Click here4Click here5

B. Audio Driver for Windows NT SOFTWARE SETUP 55Click here1Click here2Click here3Click here4Click here5

Please replace your battery only with the same type, or a similar type recommended by thebattery manufacturer. If the battery is replaced incorrectly

CHAPTER 5 BIOS UPGRADECaution!Only users familiar with the upgrade procedure are recommended to update the BIOS ofthe motherboard

BIOS UPGRADE 57Your system could be damaged if the wrong BIOS version isaccidently used. If you are not

• • • • • I/O Bus Slot- 6 X Master/Slave PCI Bus slots (PCI 2.2 compliant)- 1 X CNR (Communication and Networking Riser) slot• Award BIOS- Suppor

4 INTRODUCTION• PCB Dimensions- ATX form factor, 4-layer PCB, 21.3 cm x 30.5 cm (8.4 inch x 12 inch)• Other Features-

HARDWARE INSTALLATION 5CHAPTER 2 HARDWARE INSTALLATION2.1 Transcend’s TS-ASP3 MotherboardWake on LAN·WOL HeaderIrDAHeaderUSB3/4