Intel DX79TO Guida Utente Scaricare il pdf (Pagina 39)

Installing and Replacing Desktop Board Components

Installing a Processor Fan Heat Sink

The LGA2011 processor socket has four threaded holes for mounting a processor fan

heat sink. Figure 14 shows installation of a typical processor fan heat sink; yours may

ffer. For detailed instructions on attaching a processor fan heat sink to the Desktop

Board, refer to the Intel boxed processor manual, Intel boxed thermal solution

manual, or instructions third-party thermal solution providers.

Connect the processor fan heat sink cable to the 4-pin processor fan header (see

Figure 14). A fan with a 4-pi

n connector as shown in Figure 14 is recommended;

however, fans with a 3-pin connectors can be used. However, since a 3-wire fan

cannot use the onboard fan control, the fan will always operate at full speed.

Figure 14. Installing a Fan Heat Sink and Connecting the Cable to the

Processor Fan Header

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 85 86

Nessun commento

Intel DX79TO Guida Utente Pagina 39