
Intel® Solid-State Drive 730 Series
December 2014 Product Specification
330177-003 21
5.4 Device Statistics
In addition to the SMART attribute structure, statistics pertaining to the operation and health of the Intel® SSD 730
Series can be reported to the host on request through the Device Statistics log as defined in the ATA specification.
The Device Statistics log is a read-only GPL/SMART log located at read log address 0x04 and is accessible using
READ LOG EXT, READ LOG DMA EXT or SMART READ LOG commands.
The following table lists the Device Statistics supported by the Intel SSD 730 Series.
Table 13: Device Statistics Log
Equivalent SMART attribute if applicable
0x01 - General
Statistics
0x04 - General
Errors Statistics
Num Reported Uncorrectable
Errors
Num Resets Between Command
Acceptance and Completion
0x06 - Transport
Statistics
0x07 - Solid State
Device Statistics
Percentage Used Endurance
Indicator
E9h
This statistic counts up from 0 rather than down from 100,
and may go beyond 100 for drives that exceed their
expected lifetime.
5.5 SMART Command Transport
With SMART Command Transport (SCT), a host can send commands and data to an SSD and receive status and
data from an SSD using standard write/read commands to manipulate two SMART Logs:
Log Address E0h ("SCT Command/Status") — used to send commands and retrieve status
Log Address E1h ("SCT Data Transfer") — used to transport data
5.6 Data Set Management Command Set
The Intel SSD 730 Series supports the Data Set Management command set Trim attribute, which consists of:
DATA SET MANAGEMENT
Commenti su questo manuale