Intel ISP1100 Manuale Utente Scaricare il pdf (Pagina 47)

Removing/Installing Server Components 47

Removing the Rear I/O Filler Panel(s)

NOTE

Perform this procedure only if you are installing PCI add-in card(s) in unused

expansion slots that still have an I/O filler panel installed.

Perform this procedure to remove the rear I/O filler panel(s). Refer to Figure 26 while performing

this procedure.

1. Use a Phillips screwdriver and remove the two screws (A) securing the filler panel retention

bracket (B) to the top edge of the server back panel.

2. Remove the retention bracket.

3. Remove the filler panel (C) from the expansion slot for the add-in card(s) you are installing.

OMO9439

Figure 26. Removing the Rear I/O Filler Panel(s)

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 80 81

Nessun commento

Intel ISP1100 Manuale Utente Pagina 47