Intel AT80571RG0601ML Scheda Tecnica Scaricare il pdf (Pagina 27)

Datasheet 27

Electrical Specifications

NOTES:

1. Unless otherwise noted, all specifications in this table apply to all processor frequencies.

2. GTLREF is to be generated from V

by a voltage divider of 1% resistors. If an Adjustable

GTLREF circuit is used on the board (for Quad-Core processors compatibility) the two

GTLREF lands connected to the Adjustable GTLREF circuit require the following:

GTLREF_PU = 50 Ω, GTLREF_PD = 100 Ω.

3. R

is the on-die termination resistance measured at V

/3 of the GTL+ output driver.

4. COMP resistance must be provided on the system board with 1% resistors. COMP[3:0] and

COMP8 resistors are to V

2.8 Clock Specifications

2.8.1 Front Side Bus Clock (BCLK[1:0]) and Processor Clocking

BCLK[1:0] directly controls the FSB interface speed as well as the core frequency of the

processor. As in previous generation processors, the processor’s core frequency is a

multiple of the BCLK[1:0] frequency. The processor bus ratio multiplier will be set at its

default ratio during manufacturing. The processor supports Half Ratios between 7.5

and 13.5, refer to Ta b l e 15 for the processor supported ratios.

The processor uses a differential clocking implementation. For more information on the

processor clocking, contact your Intel field representative.

Table 14. GTL+ Bus Voltage Definitions

Symbol Parameter Min Typ Max Units Notes

GTLREF_PU

GTLREF_PD

GTLREF pull up on Intel

3 Series Chipset family

boards

57.6 * 0.99 57.6 57.6 * 1.01 Ω 2

GTLREF pull down on

Intel

3 Series Chipset

family boards

100 * 0.99 100 100 * 1.01 Ω 2

Termination Resistance 45 50 55 Ω 3

COMP[3:0] COMP Resistance 49.40 49.90 50.40 Ω 4

COMP8 COMP Resistance 24.65 24.90 25.15 Ω 4

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 99 100

Nessun commento

Intel AT80571RG0601ML Scheda Tecnica Pagina 27