Intel S5520SC Specifiche Scaricare il pdf (Pagina 58)

Functional Architecture Intel® Workstation Board S5520SC TPS

Revision 1.7

Intel order number: E39530-010

RJ-45 Pins Signal Abbreviation DB9 pins

6 Received Data RD 2

7 DCD or DSR DCD/DSR 1 or 6 (refer note)

8 Clear To Send CTS 8

Note: The RJ45-to-DB9 adapter should match the configuration of the serial device used. One

of two pin-out configurations is used, depending on whether the serial device requires a DSR or

DCD signal. The final adapter configuration should also match the desired pin-out of the RJ-45

connector, as you can also configure it to support either DSR or DCD.

Serial B is an optional port that is accessed through a 9-pin internal DH-10 header. You can use

a standard DH-10 to DB9 cable to direct serial B to the rear of a chassis. The serial B interface

follows the standard RS232 pin-out as defined in the following table.

Table 12. Serial B Header Pin-out

Pins Signal Name Serial Port B Header Pin-out

1 DCD

2 DSR

3 RX

4 RTS

5 TX

6 CTS

7 DTR

8 RI

9 GND

3.9 Floppy Disk Controller

The Intel

Workstation Board S5520SC does not support a floppy disk controller interface.

However, the system BIOS recognizes USB floppy devices.

3.10 Keyboard and Mouse Support

The Intel

Workstation Board S5520SC does not support PS/2* interface keyboards and mice.

However, the system BIOS recognizes USB Specification-compliant keyboards and mice.

3.11 Video Support

The Intel

Workstation Board S5520SC integrated BMC includes a 2D SVGA video controller

and 8 MB video memory.

The 2D SVGA subsystem supports a variety of modes, up to 1600 x 1200 resolution in 8/16 bpp.

It also supports both CRT and LCD monitors with up to a 85-Hz vertical refresh rate.

You access onboard video using an optional accessory cable (FXXSCVDCBL), which provides

a standard 15-pin VGA connector. You can disable the onboard video controller using the BIOS

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 191 192

Nessun commento

Intel S5520SC Specifiche Pagina 58